Tools

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

Service your TRP brakes like a pro with our new Bleed Funnel. COMPATIBILITY CHART BRAKE MODEL COMPATIBILITY QUADIEM SERIES YES TRAIL SERIES YES SLATE SERIES NO* HYLEX SERIES YES HY/RD SERIES YES HYDRO TT YES DASH SERIES NO After feedback from our pro Athletes (and their mechanics) we have developed the TRP bleed funnel to simplify the bleed process. Take your service to the next level. *Slate uses a smaller bleed fitting. Funnel can be used with a slate Bleed fitting adapter

Hex Key Wrench available in two sizes: 2/2.5/3mm and 4/5/6mm

TB-1065: For Shimano® cartridge B.B. & ISIS drive compatible. Use with 1/2” Dr. driver and 24mm wrench. TB-1065 can be turned with TB-8830. TB-1075: For Shimano® & lSlS drive compatible. Use with 1/2” Dr. air driver.

Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.

- For Shimano HG Cassettes - Use with 24mm and 19mm wrench or 1/2" ratchet wrench

TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench. TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.

Use on 8, 9, 10 speed and BMX/Fixie chains (3/32" and 3/16").

- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps - Housing end reformer in the handle TB-4575

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

- 5 DART plugs for use with the Stan's NoTubes DART tool

Shimano Genuine disc brake bleed syringe kit Features: - Strong threaded tube joint - Bleed nipple tool - Locking clip - Bleeding instructions available for download under 'Documents & Links' below

Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

Shimano Genuine disc brake bleed Funnel unit for BL type MTB brake lever (M5 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

To adjust preload on Hollowtech II cranksets

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

A great way to make cleaning easier is to remove your wheels. While this may seem excessive, removing the wheels from your bike opens up many tight areas that are tough to clean, allowing easier access and better visibility of these surfaces. The Pedro's Chain Keeper was designed with this wheels-off technique in mind and makes sure your chain stays off your frame, preventing damage and keeping your drivetrain free to turn as is commonly needed during cleaning. Try it out! The Chain Keeper inserts into the right rear dropout when the wheel is removed for cleaning, storing, or transporting your bike. The quick-release lever allows for fast and easy installation and removal.

Professional quality heat-treated steel with hand-saving no-slip plastic grip and ergonomic design for maximum leverage and comfort. - Precision cut for an exact fit with no slippage - Lifetime warranty on all Pedro's tools

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Park's Bottom Bracket Wrench has 2 ends to fit slotted bottom bracket adjusting cups and cups with raised 16mm wrench flats common on older English and less-expensive bicycles. Please ask if you have any questions whether this wrench is right for your repair.

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.

Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

- Protects rotor and calipers from overspray and while in transit - Quick and easy to use, fits all MTB and road rotors - Simply rinse and use again - Breathable neoprene

- Three brush heads featuring tough nylon bristles and an integral scraper for mud de-clogging - Ideal for chain, cassette and sprockets - 10-speed compatible

- Heavy-duty device that cleans chain in seconds - The kit includes a 75 ml bottle of Drivetrain Cleaner that can be either sprayed over the drivetrain or poured into the top reservoir - Liquid release button ensures the application of the cleaner is quick and easily controlled. - Abrasive cleaning teeth and rotating brush wheels which have 120 contact points cover every part of each chain link for a deep and thorough clean - Excess dirty fluid drops into a second lower reservoir so it’s kept away from the clean chain

Smart Design - Interlock the levers to create a MissingLink opener. Remove single to 12-speed MissingLinks with ease. Ergonomic - Accurate and comfortable design allows you to quickly insert the opener into the chain for MissingLink removal. Durable Flexibility - Made using Swiss polymers specially formulated for the perfect balance of rigidity and flexibility. Semi-gloss finish helps prevent scratches on your bike. Multi-Functional - Separated, the MissingLink Opener becomes easy-to-use tire levers and a deflating tool. Super-Portable - Stackable. Saves space.

- Tool includes: 1.522.53456 and 8mm hex Torx T25 and both flat head and crosshead screwdriver

- Made of Cr-V steel - To be used with 1/2" driver

- Vinyl cushion-coated on long side for better grip (can be trimmed to expose hex for use) - Extra long for increased leverage (200mm)

- JIS/ISIS/Octalink crank tool with durable handle

- Spoke Wrench w/8 notches for 10 - 15 ga nipples - Forged Cr-Mo

Chain Whip 1/2" x 3/32" w/Ergonomic handle

- POM Tire Levers   - Set of 3 pieces.  - Unique V shaped design can be easily fixed on the spokes.  - Air vent function added on back.  - Smart V shaped design on back is a fulcrum on the rim for tire removal

Pedal Wrench 15mm off-set design w/ergonomic handle

The NEW Range Click Torque Wrench replaces its predecessor with solid, tactile click-torque function, a wide measurement range, user-friendly ergonomics, and shop-quality fit and finish. With 13, high precision S2 tool steel bits and a protective, compact, and weather resistant TPU foldup style case, this tool is a perfect companion for safe, secure repairs in the shop or on the go. - Ratchet wrench for speed; torque wrench for precision - Portable and light – fits in a ride pack or travel-transport - Infinite torque capabilities within the 2-10Nm range - 2-way ratchet wrench protects the integrity of torque wrench function - 6-degree ratchet engagement maneuvers in tight spaces - Torque validation for “bolt-checks” on any bicycle components - Compact head and bit design allows clearance and full function in tight spaces - 14 labeled S2 Steel* allen key, torx bit, and Phillips head bits covering the most common bicycle applications - #2 Philips; Torx: T10 , T20, T25, T30; Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm; - Extended length: 5mm Hex & T25 Torx - User ‘zero’ ensures accuracy of the torque bar for every use - 3rd-party tested and validated for accuracy and longevity (exceeds ISO standard) *S2 Steel is industry-leading tool steel for precision edges and durability

- For removal of crank arms from cartridge style bottom brackets - Compatible with square taper, Octalink and ISIS bottom brackets - Works with 8mm Hex or large adjustable wrench

- For clean cutting of bicycle cables and housings - Spring loaded for ease of use - Built-in pick for opening housing liner

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9, 10 and 11-speed chains - Comfortable rubber coated handle improves grip

- For removal of cassette-type rear wheel gears - Must be used with compatible cassette lockring tool - Comfortable rubber coated handle improves grip - Fits up to 9sp cassette