Other

- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1

Flat Mount Disc Caliper Bracket Bolts

- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5

SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups

- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit

REAR DERAILLEUR CARBON INNER CAGE RED XPLR AXS E1 INCLUDING ALUMINIUM SCREWS Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.

- GX DH/X01DH 7 Speed Rear Derailleur B-Bolt and Limit Screw Kit Hex5

- Chainring bolts for Rival D1 2x cranks

Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

- SRAM, Road pulleys, 11.7515.060.000

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes a Threaded Hose Barbs and a Compression Fittings. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included

Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.

Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.

Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC

Force eTap AXS Rear Derailleur Pulley Kit - Steel bearings - 12-Speed

Replacement hoods for SRAM hydraulic shifter/brake levers.

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

To complement both Eagle 90 and 70, we sought to design a mechanical dropper lever that not only matched our Stealth brakes and Transmission shifters but offered optimized performance as well. Compatible with most mechanically actuated dropper posts, our dropper lever features intuitive ergonomics based on Transmission shifting. And for a completed cockpit aesthetic, it features cable routing that is designed to pair with SRAM Stealth brakes, resulting in clean cables left and right. Features - Shared design language with Eagle Transmission and Stealth Brakes to provide the cleanest looking and performing cockpit. - Cockpit tidying Shift Housing/Brake Hose clip included. - Pull ratio compatible with most mechanically actuated dropper posts. - Lightweight, robust design. - MMX compatible with three mounting options for best compatibility with E-MTB controls.

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken

Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings

GXP Shield and Wave Washer