Chains

- All have chamfered link plates for optimum shifting performance with Shimano, SRAM, and newer Campagnolo 10-speed systems - ConneX-10sB: "Black edition" with ultra black-coating of the plates, ensuring optimal corrosion protection, 264g - Connex-10s0: corrosion-resistant steel link plates, 264g - Includes ConneX 10-speed link

- All have chamfered link plates for optimum shifting performance - ConneX-9sG: high grade brass coating offers a reliable protection against corrosion, 289g - ConneX-9sB: "Black edition" with ultra black-coating of the plates, ensuring optimal corrosion protection, 290g - ConneX-900: corrosion-resistant steel link plates, 290g - Includes conneX 9-speed (6.5mm) spring-clip connector

Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE close - Inner-plate treated with SHIMANO's ultra-low friction surface treatment “SIL-TEC” (inner plate) - Same durability as current 10-speed chain BENEFIT close - System engineered drivetrain component for optimal power transfer - Smooth and precise front and rear shifting - Directional chain - Weight: 257g (114 Link)

- Deore/Tiagra 9-speed compatible - 3/32-inch - 116 links

Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links

Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams.

CN-HG701-11 Super Narrow HG-X11 Chain (11-speed) FEATURE - Directional 11-speed chain - More efficient and silent, less maintenance - MTB, Road, E-BIKE 11-speed compatible - Reinforced chain for E-BIKE use BENEFIT - Smooth and reliable shifting performance - Weight: 257g (114Links)

- 9-speed compatible - XT/Ultegra - 116 links

The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Compatibility: 10-speed - Chain length: 144 links

The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems

The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems

SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.

SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.

SRAM’s PC-971 Chain delivers light weight, strength and smoothness to your drivetrain. Its nickel-plated sideplates provide faster and more accurate shifting plus excellent reliability. And, with its great PowerLink, you don’t even need tools to install it.

With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.

The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No

Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level KMC X-Series chains. - Includes KMC Missing Link 11 - Optimized chamfer angles for superior stability in extreme chainlines - Upgraded outer plate chamfering for minimized cassette tooth interference - Double X-Bridge structure technology for improved shifting performance - Mushroomed Pin Riveted - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

Z410 is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g

The Z8.1 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.1 mm - Drivetrain Speeds: 6, 7, 8 - Chain Connection Type: Reusable Master Link

The Z8 chain features inner plate chamfering and a z-bridge shape, making it suitable for a variety of riding styles. - Inner plate chamfering to smooth shifting - Z-bridge shape - Designed for use with internally geared hubs - Compatible with Shimano, SRAM, and Campagnolo drivetrains - Suitable for MTB, road, and comfort riding - 1/2 x 3/32"

SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

X-Superlight series chains are high-quality, high performing chains offering amazing shifting performance on any drivetrain you choose. For athletes looking for the lightest, strongest, smoothest shifting chain look no further. The main characteristic of the black Diamond Like Coating (DLC) is reduction of abrasive wear. Besides this, it’s surface hardness is higher than most coatings, this ensures a long-term function, optimal stability and higher durability. - Includes KMC Missing Link 11 - Compatible with all 11 speed systems (including Campagnolo/Shimano/SRAM) - Weight: 243g

- Super-light chain for use with 10-speed Campagnolo/Shimano/SRAM with Diamond Like Coating for extra durability - Use: Mountain/Road - Size: 1/2 x 11/128-inch - Width: 5.9mm - Weight: 253g - 116 links

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

The KMC Z1eHX chain is suitable for a variety of single speed riding styles, such as BMX and fixed gear, fitness bikes, track bikes, internally geared hubs, and eBikes. - Features a heavy duty structure and stretch proof treatment for high pin power with reinforced durability - Anti-drop design reduces possibility of chain drop - eBike compatible - Links (links): 112 - Width: 7.8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Single Use Master Link - Designed for ebike: Yes